Cookie Img

Stability Chambers

Stability Chambers
Stability Chambers
Product Code : 80
Product Description

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

Salient Features

  • Fulfills storage conditions of 25°C “ 60% RH, 40°C “ 75% M RH, 30°C “ 65% RH, 25°C “ 40% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI ‘Datasoft’ data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS “ 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Optional
    • Touch screen display ( TFT ) with additional features(Details overleaf)
    • Validation protocol with IQ, OQ, PQ Documentation

LCD Display

  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Power failure and resumption recorded with date and time
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
  • PC communication through RS-485 with data acquisition software
  • Remi “Datasoft”™ Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)

Touch Screen Display

  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 10,000 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • PC communication through REMI Datasoft
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions

REMI ‘Data Soft’

  • Multiple level alpha numerical password with password ageing
  • Secured audit trail report
  • Alarm report with mention of alarm condition
  • Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
  • Reports in graphical and tabular form
  • Data Stored in PC server with Lan connectivity and can be monitored on PC with password authentication
  • Multi chamber data acquisition on single software
  • Communication through RS 485 / TCP IP
  • GSM Mobile Alert for six Numbers

Optional Accessories

To be Ordered separately

  • Data logger for 8 / 16 Point temperature & Humidity recording with sensors printer interface and software
  • Seven days circular chart recorder (single channel)
  • Software as per 21 CFR Part 11 requirements
  • PLC Based Control System with HMI Touch Screen
  • Biometrics Magnetic Door Access for Secured Door opening with software to maintain log
  • Validation (mapping) consist of one cycle for temperature at any one set point for 24 hours on empty and loaded condition
  • Standby Refrigeration System
  • Standby Humidity System
  • GSM alert through SIM card

REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

Salient Features

  • Fulfills storage conditions of 25°C “ 60% RH, 40°C “ 75% M RH, 30°C “ 65% RH, 25°C “ 40% RH
  • Precise monitoring of temperature and humidity conditions
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
  • Hermetically sealed Compressor with CFC free refrigerant
  • Chamber calibration port on side
  • Adjustable trays
  • Output for remote alarm
  • Microprocessor controller with LCD display & capacitance type sensor
  • 4 ” attractive LCD display for direct display of humidity & temperature
  • Auto tuning of controller
  • Battery Backup for Controller
  • Settable High / Low alarm points
  • Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • REMI ‘Datasoft’ data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
  • Power failure and resumption recorded with date and time
  • PC communication through RS “ 485 with data acquisition software
  • High temperature safety cut off & alarms for high/low set parameters
  • Low water level alarm and power cutoff of boiler tank heater
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Auto door closer
  • Attractive door profile
  • Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
  • Optional
    • Touch screen display ( TFT ) with additional features(Details overleaf)
    • Validation protocol with IQ, OQ, PQ Documentation

LCD Display

  • 4 Inch attractive LCD display
  • Intelligent Controller helps maintain temperature in case of sensor failure
  • Battery Backup for Temperature Controller
  • Auto tuning of controller
  • Self-Diagnosis for errors
  • Histogram format of 24 hours temperature recording
  • Power failure and resumption recorded with date and time
  • Settable High / low alarm points
  • Memory for storage of upto 1000 records
  • Centronic interface to record Temperature, Date, & Time by attaching Dot Matrix printer with adjustable print interval
  • Alarm on equipment / output for remote alarm
  • PC communication through RS-485 with data acquisition software
  • Remi “Datasoft”™ Data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (optional)

Touch Screen Display

  • 7 inch big colour touch screen
  • PLC (Programable logic controller)
  • Memory of 10,000 records
  • Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
  • PC communication through REMI Datasoft
  • Ethernet port
  • Battery backup in case of power failure for display, alarms & off-line data logging (optional)
  • Programmable cyclic timer for controlling illumination conditions

REMI ‘Data Soft’

  • Multiple level alpha numerical password with password ageing
  • Secured audit trail report
  • Alarm report with mention of alarm condition
  • Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
  • Reports in graphical and tabular form
  • Data Stored in PC server with Lan connectivity and can be monitored on PC with password authentication
  • Multi chamber data acquisition on single software
  • Communication through RS 485 / TCP IP
  • GSM Mobile Alert for six Numbers

Optional Accessories

To be Ordered separately

  • Data logger for 8 / 16 Point temperature & Humidity recording with sensors printer interface and software
  • Seven days circular chart recorder (single channel)
  • Software as per 21 CFR Part 11 requirements
  • PLC Based Control System with HMI Touch Screen
  • Biometrics Magnetic Door Access for Secured Door opening with software to maintain log
  • Validation (mapping) consist of one cycle for temperature at any one set point for 24 hours on empty and loaded condition
  • Standby Refrigeration System
  • Standby Humidity System
  • GSM alert through SIM card
Contact Us

Remi House, 3rd Floor, 11, Cama Industrial Estate, Walbhat Road, Goregaon (East), Mumbai, Maharashtra, 400063, India
Phone :91-22-40589888