home

Walk-in Stability Chamber

home
Walk-in Stability Chamber
Walk-in Stability Chamber
Price And Quantity
  • Unit/Units
  • 1
  • Unit/Units,
  • 896800.00-
    Product Specifications
    • Silver
    • Lab Use
    • 2 to 8 deg C Celsius (oC)
    • Stainless Steel
    • 220 - 440 VAC Volt (v)
    • Cold Room Use
      Product Description

      REMI Walk in chambers are designed for simulating, monitoring & control of environmental conditions like temperature & humidity. All these chambers are double walled & modular in construction, easy to assemble at site. They are available in standard sizes & can also be tailor made to suit specific requirements. Forced air circulation with the help of fan blower maintains uniform conditions. Use of intelligent control systems & dedicated REMI Datasoft software complying to 21 CFR Part 11 requirements greatly enhances the performance. These chambers can be provided with standby refrigeration & humidity systems (optional) for uninterrupted functioning.

      CONSTRUCTION
      • Double walled prefabricated modular panels with PUF insulation, easy to assemble at site
      • Standard model with inner of Stainless Steel (304 Grade) and outer Powder coated steel sheet
      • GMP model with inner (316Grade) and outer of Stainless Steel (304 Grade)
      • CFC free Refrigeration system with split type condensing unit located outside lab helps to emit hot air beyond working area
      • Heating by long lasting SS tubular heaters
      • Humidity by steam injection. Boiler and water reservoir made of SS with heater and low water level cut off
      • Forced Air Circulation by heavy duty motor
      • SS racks and trays

      Features:
      • Microprocessor based auto tuning PID controller provided for precise control of temperature and humidity
      • Auto change over to standby systems through PLC (Optional)
      • Auto switch over to standby sensor in case of Controlling Sensor failure
      • PLC with touch screen HMI fully protected with password, instead of PID controller for precise control of temperature and humidity (optional)
      • Data stored in PC server with LAN connectivity and password protection (Optional with software)
      • GSM mobile alert on six cell phones via SMS in case of temperature and humidity deviations beyond specified Limits (Optional with software)
      • Capacitance type Humidity sensor enables direct display of RH and temperature (STABILITY CHAMBERS)
      • PC communication via Ethernet/RS-485 and software complying to 21CFR part 11 USFDA guidelines (Optional)
      • Multipoint Temperature and Humidity logger with printout facility (optional)
      • Facility to open the door from inside in case of door locked with emergency bell having switch inside chamber
      • Thirty chambers connected to one software
      • Integration with BMS

      • Capacitance type Humidity sensor enables direct display of RH and temperature (STABILITY CHAMBERS)
      • PC communication via Ethernet/RS-485 and software complying to 21CFR part 11 USFDA guidelines (Optional)
      • Multipoint Temperature and Humidity logger with printout facility (optional)
      • Facility to open the door from inside in case of door locked with emergency bell having switch inside chamber
      • Thirty chambers connected to one software
      • Integration with BMS
      • Audio visual alarm for temperature, humidity variations and utility failures
      • Output for remote alarm in lab and at security gate
      • Magnetic door lock system with biometrics for door access and software to monitor door open log (Optional)
      • Safety includes shut off of humidity and air heaters in case of temperature overshoots or undershoots beyond specified limits with alarms
      • Electrical circuit breaker
      • Low water level alarm and power cut off of boiler tank heater
      • Overload cut off relay for compressor
      • Time delay for compressor switch on

      Other details

      • Intelligent PLC/PID control system helps maintain highly accurate set parameters
      • Biometrics system for secured door access
      • Dual Capacitance type Humidity Sensors failure of one sensor automatically transfers regulation to other sensor
      • Chamber illumination by fluorescent tubes
      • PUF Insulation 80 mm for maximum thermal protection
      • Spring Door Latch for door closure
      • Blower Motor for forced air circulation
      • Control panel with Data-logger, PC connectivity and electrical components
      • Standby refrigeration by Compressor-1 and Compressor-2
      • Standby humidity by Heater-1 and Heater-2
      • Emergency bell switch to open the door from inside
      • Highly ergonomic handle with unique multi lever key lock
      • SS Racks and Trays

      Technical Specification

      WALK-IN STABILITY CHAMBERS

      WSC-50

      WSC-80

      WSC-100

      WSC-120

      WSC-150

      WALK-IN COLD ROOM

      WCR-50

      WCR-80

      WCR-100

      WCR-120

      WCR-150

      Internal Volume (Liters)

      5000

      8000

      10000

      12500

      15000

      Number of Shelves

      16

      24

      32

      48

      48

      Internal Dimension W x D x H (mm)

      1250 x 2000 x 2000

      2000 x 2000 x 2000

      2000 x 2000 x 2500

      2000 x 2500 x 2400

      2500 x 2500 x 2400

      External Dimension W x D x H (mm)

      1410 x 2950 x 2160

      2160 x 2950 x 2160

      2160 x 2950 x 2660

      2160 x 3450 x 2560

      2660 x 3450 x 2560

      Internal Body Material

      Stainless Steel 304 grade (Standard Models), Stainless Steel 316 grade (GMP Models)

      External Body Material

      Powder Coated CRCA Steel (Standard Models), Stainless Steel 304 grade (GMP Models)

      Insulation

      80 mm minimum, CFC free polyurethane foam

      Illumination

      Fluorescent Tubes

      Control & Display

      Microprocessor based PID control system with large 4" LCD Display

      Power Failure Alarm

      Audio Visual Alarm

      Door Open Alarm

      Audio Alarm in case door open for over one minute

      Electrical

      220-240 volts, 50Hz, Single Phase


      Trade Information
      • Telegraphic Transfer (T/T), Cheque, Cash Advance (CA)
      • 10 Per Day
      • 3 Week
      • Africa, Middle East, Western Europe, Central America, Australia, Asia
      • All India
      Related Products
      RQG-126/D Laboratory Stirrers


      Send Inquiry
      CM-8 Plus Compact Bench Top High Capacity Cooling Centrifuges


      Send Inquiry
      CHM-28 Plus LCD Humidity Chambers


      Send Inquiry
      C-24 Plus Refrigerated Centrifuge


      Send Inquiry
      R-304 Bench Top Centrifuges


      Send Inquiry
      Humidity Chambers


      Send Inquiry
      right arrow
      left arrow
      Contact Us

      Remi House, 3rd Floor, 11, Cama Industrial Estate, Walbhat Road, Goregaon (East)  Mumbai  Maharashtra  India  08045478084
      Phone :08045478084